A-110 and A-110-5P, A-121, and A-121-5P

LONG LIFE LUBRICATING FLUIDS

Applications: A-100, A-100-5P, A-121, and A-121-5P are tried and proven premium quality impregnating lubricants that have become the standards for many pm bearings. These oils were developed jointly with the R&D team of a leading powder metal manufacturer for the purpose of providing outstanding performance in powdered metal bearings.

The “5P” designation refers to the addition of colloidal graphite. The graphite fortified version of each tested for 7,700 hours at ambient temperatures, 25,000 PV (pressure velocity) at 1,000 rpm and 835 hours at 205°F, 18,000 PV at 1,000 rpm without failure.

Typical Industrial Applications: Impregnating Lubricant, Hydraulic Systems, Gear Cases, Appliances, Business Machines, Power Tools

Performance Benefits: Effective at higher temperatures, Extremely good rust and oxidation protection – actually sheds water, Longer life than many conventional petroleum products, Outstanding wear protection, Excellent oxidation stability, Compatible with many plastics, “Oils containing “5P” or graphite should be mixed before opening or using for even dispersement.”

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

A-121


77 76.4 / 9.5 100 250 / 482 -30 / -22 0.88

A-121-5P


77 75 / 10.0 100 250 / 482 -30 / -22 0.88

A-110


32 32 / 5.25 95 >200 / 392 -24 / -11 0.87

A-110-5P


32 32 / 5.25 95 >200 / 392 -24 / -11 0.87


Back To Top

Chemlube 201, 207, 315, 645, and 645-AW

SYNTHETIC INSTRUMENT LUBRICANT

Applications: Chemlube 201, 207, 315, and 645 are premium synthetic diester lubricants used for a wide variety of sintered powdered metal bearings over a wide temperature range. Chemlube 201, 207, and 315 are mostly used in areas where low temperature start-up or operation is required. Chemlube 645 is one of the most popular impregnating oils and can be used as a general purpose lubricating oil. 645 is usually used at higher temperatures and contains additives to reduce oil migration or “slinging”. Chemlube 645AW has been formulated with additional anti-wear additives to provide higher load carrying protection.

Chemlube 201 is equivalent to MIL-L-6085A requirements and conforms to those specifications.

Typical Industrial Applications: Impregnating Lubricant, Instruments, Business Machines, Appliances, Meters, Postal Equipment, Motors, Timing Devices, Compressors, Hydraulic Devices, Electric Motors

Performance Benefits: Light viscosity for outstanding low temperature actuation, High viscosity index, less change with temperature, Low evaporation rate for long life, Excellent oxidation stability – non gumming, Wide useful temperature range, -65° to 300°F, Equivalent to MIL-L-6085A requirements

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 201


13.3 / 3.6 162 199 / 391 -65 / -85 0.925

Chemlube 207


36.1 / 8.8 232 232 / 450 -57 / -70

Chemlube 315


5.07 / 1.75 152 182 / 360 -76 / -105 0.86

Chemlube 645


60.4 / 11.0 176 245 / 473 -59 / -75 0.91

Chemlube 645 AW


61 / 11 180 245 / 473 -59 / -75 0.91


Back To Top

Chemlube 209, 217, and 5072

SYNTHETIC HIGH TEMPERATURE LUBRICANT

Applications: Chemlube 209, 209G, 217, 217G, and 5072 are premium quality high performance impregnating oils formulated using polyol ester (POE) base oils. The “G” designation refers to the addition of colloidal graphite which eliminates “dry” start-up and is particularly useful in high temperature and high load conditions.

The Chemlube 209G has been tested for 4,000 hours at 250°F, 18,000 PV at 1,000 rpm without failure. Chemlube 5072 was developed as an improved version of Chemlube 209 for use under severe wear conditions. Chemlube 217 has the highest flash point of almost any of our impregnating oils.

Typical Industrial Applications: Impregnating Lubricant, Instruments, Gas Turbines, Compressors, Conveyors, Blowers, Heaters, Machine Tools, Ovens, High Temperature Motor Bearings, Small Tools, Electric Motors

Performance Benefits: Superior high temperature oil, Low evaporation rate for long life, Excellent oxidation and thermal stability ,Outstanding load carrying capability, Wide useful temperature range, Longer life than other synthetic oils, Oils containing “G” or graphite should be mixed
before opening or using for even dispersement

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 209


39.1 / 6.5 120 246 / 475 -51 / -60 1.00

Chemlube 209G


41.0 / 7.6 157 246 / 475 -51 / -60 1.00

Chemlube 217


56.9 / 9.3 145 288 / 550 -54 / -65 1.01

Chemlube 217G


55.4 / 9.14 146 288 / 550 -54 / -65 1.01

Chemlube 5072


42 / 7.8 161 246 / 475 -57 / -70 1.00 – 1.01


Back To Top

Chemlube 626

SYNTHETIC IMPREGNATING LUBRICANT

Applications: Chemlube 626 is a synthetic impregnation lubricant for the longest possible life over the widest temperature range. Chemlube 626G is formulated with the addition of colloidal graphite for improved performance.

Typical Industrial Applications: Impregnating Lubricant, Appliances, Small Power Tools, Automotive Accessory Motors, Timers, Business Machines, Sound Equipment Applications, Electric Motors

Performance Benefits: Low evaporation rate for longest life, Excellent oxidation stability, no deposits, Widest useful temperature range, Resists “pumping” – the oil migrates slowly out, Built-in non-sling, non-drip characteristics, Reliability under adverse conditions of temperature, time, wear, and oxidation

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 626G


68 72.81/74.7 / 10.77/11.0 130 232 / 495 -40 / -40 0.865

Syntroil 330


64.7 / 11.7 147 232 / 450 -51 / -60 1.008

Chemlube 626


68 69.7 / 9.7 119 232 / 495 -40 / -40 0.83


Back To Top

Syntroil 220, 330 & 440

SYNTHETIC IMPREGNATING LUBRICANTS

Applications: The Syntroil series lubricants are designed for the impregnation of sintered metal bearings, structural parts and reservoirs for the longest possible life over the widest temperature range. For appliances, automotive, business machines, power tools and sound equipment applications. The Syntroils are the finest impregnating fluids available today.

The Syntroil series can be fortified with colloidal graphite, which has been milled to an average particle size of .5 micron. Syntroil 220G, 330G, and 440G help eliminate dry start-ups, chirping or squeaking at low temperatures, and reduces wear in high wear applications.

Typical Industrial Applications: Impregnating Lubricant, Appliances, Automotive Parts, Business Machines, Power Tools, Sound Equipment Applications

Performance Benefits: Very low evaporation rate for longest life, Widest useful temperature range, Excellent oxidation stability, no deposits, Outstanding film strength, better than other synthetics, Built-in non-sling, non-drip characteristics, Resists “pumping”, Assured reliability under adverse conditions of temperature, time, wear and oxidation, Syntroils fortified with graphite: Containers should be mixed before opening or using for even dispersement

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Syntroil 220


32.0 / 6.8 150 219 / 425 -57 / -70 1.002

Syntroil 440


73.6 / 12.3 165 243 / 470 -46 / -50 1.005


Back To Top

Syntroil 555 & 560

SYNTHETIC IMPREGNATING LUBRICANTS

Applications: Syntroil 555 and 560 are impregnation lubricants for sintered metal bearings, structural parts and res- ervoirs for the longest possible life over the widest temperature range. They were developed to perform under the highest temperature conditions normally encountered in small electric motors. These lubricant are specifically formulated without polymer to handle the extreme high temperatures.

Syntroil 555 can be formulated with the addition of colloidal graphite.

Typical Industrial Applications: Impregnating Lubricant, Timers, Electric Motors, Fireplace Inserts

Performance Benefits: Low evaporation rate for longest life, Excellent oxidation stability, no deposits, High Viscosity, Outstanding film strength, suitable for use in high-wear conditions, High temperature performance, Designed exclusively for longevity under adverse conditions of temperature, time, wear, and oxidation, Syntroil 555G: Containers should be mixed before opening or using for even dispersement

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Syntroil 555


122 / 13.8 110 282 / 540 -34 / -30

Syntroil 560


223 / 19.0 95 307 / 585 -35 / -31


Back To Top

Omnilube 60, 60AR, 100, 180, 180AR, 300, 350, 550 & 850

SYNTHETIC PLASTICS COMPATIBLE IMPREGNATING LUBRICANTS

Applications: Omnilube 60 & 100 are fully synthetic lubricants designed specifically for use in powder metal sleeve bearings operating at cold ambient conditions. They are suited for use in refrigerator frost free fan motors that must operate at cold temperatures, and yet protect the bearing as bearing and shaft temperatures increase.

Omnilube 180 was developed specifically for powder metal bearings in electric motors where compat- ibility with plastics such as polystyrene or other plastic material is required. This premium lubricant is typical of all Ultrachem® Impregnating Oils in their cleanliness, longevity, wide useful temperature range and low volatility. The Omnilube product line should be evaluated for cost effectiveness where silicone fluids have been employed or the use of plastic materials has been restricted due to lubricant incompatibility.

Omnilube 300 & 350 were developed specifically for powder metal bearings in electric motors where compatibility with plastics such as polystyrene or other plastic material is required. These premium fluids are typical of all Ultrachem Impregnating Oils in their cleanliness, longevity, wide useful tempera- ture range and low volatility.

Omnilube 300G and 350G are formulated with the addition of colloidal graphite, which has been milled to an average particle size of 0.5 micron. These versions help eliminate dry startups, chirping or squeaking at low temperatures, and reduce wear in high wear applications. The graphite addition does not change the typical properties listed below.

Omnilube 550 is a heavier version of our other Omnilubes. Compatible with a wide variety of plastics, Omnilube 550 is designed for use in powder metal sleeve bearings, felts, wicks, and gears that require a more viscous fluid than Omnilube 100, 300, or 350.

Omnilube 550G is formulated with the addition of colloidal graphite, which has been milled to an aver- age particle size of .5 micron. This version helps eliminate dry start-ups, chirping or squeaking at low temperatures, and reduces wear in high wear applications. Omnilube 850 is not available with graphite.

Typical Industrial Applications: Impregnating Lubricant, Refrigerator Frost Free Motors, Electric Motors

Performance Benefits: Compatible with many plastics we have tested, including several polystyrene and Noryl compounds, Inhibited to prevent oxidation, High viscosity index, Extreme long life, Non-gumming, Fortified against corrosion and rust, Omnilube 300G & 350G: Containers should be mixed before opening or using for evenly dispersement, Omnilube 550G: Containers should be mixed before opening or using for even dispersement

Omnilube plastic compatible greases are also available.

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube 60


5.8 / 1.8 152 160 / 320 -57 / -70 0.801

Omnilube 100


9.5 / 2.7 129 160 / 320 -54 / -65 0.801

Omnilube 180


38.5 / 6.2 122 238 / 460 -54 / -65 0.80

Omnilube 300


64.7 / 9.1 238 / 460 -54 / -65 0.834

Omnilube 350


65.4 / 11.4 238 / 460 -51 / -60 0.837

Omnilube 550


112.0 / 16.4 160 243 / 470 -48 / -55 0.84

Omnilube 850


185 / 21.7 160 243 / 470 -48 / -55 0.84

Omnilube 60AR


5.8 / 1.8 152 160 / 320 -57 / -70 0.799

Omnilube 180AR


36 / 6.1 116 238 / 460 -65 / -85 0.80

Omnilube 550G


106.5 / 15.7 157 243 / 470 -48 / -55 0.85


Back To Top

Omnilube Non-Tox 280, 370 & 520

SYNTHETIC PLASTICS COMPATIBLE IMPREGNATING LUBRICANTS

Applications: Omnilube Non-Tox 520, 280, and 370 were developed specifically for use on and/or in machinery and motors where incidental contact with food is a possibility. These food grade lubricants are made only with ingredients found to be suitable for such contact by the USDA. These oils, like our other Omnilubes, are compatible with most plastics. The Omnilube Non-Tox Oils were the first synthetic impregnating oils developed to meet the USDA H-1 rating.

Typical Industrial Applications: Impregnating Lubricant, Refrigerator Frost Free Motors, Electric Motors, Food Processing Applications

Performance Benefits: Compatible with many plastics we have tested, including several polystyrene and Noryl compounds, Inhibited to prevent rust and oxidation, High viscosity index, Extreme long life, Non-toxic, Low evaporation, Low pour points, Complies with FDA 21 CFR 178.3570 H-1

Omnilube plastic compatible greases are also available.

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube Non-Tox 280


68 60 / 9.51 140 240 / 465 -68 / -90 0.827

Omnilube Non-Tox 370


74 / 10.9 142 232 / 450 -40 / -40 0.838

Omnilube Non-Tox 520


32 30 / 6.26 168 232 / 450 -40 / -40 0.840


Back To Top